|
MODEL |
IP 111-DWV9 |
|
Construction |
Aluminum with steel camera mounting bracket and polycarbonate dome |
|
Finish |
Light gray polyester powder coat |
|
Light Attenuation |
Smoked 1.5 F-stops light loss Clear Zero light loss |
|
Unit Weight |
2.20 lb (1.00 kg) |
|
Shipping Weight |
4.0 lb (1.81 kg) |
|
Ports |
RJ-45 connector for 100BASE-TX |
|
Auto |
MDI/MDI-X, Autonegotiate/Manual setting |
|
Cabling Type |
CAT5 or better for 100BASE-TX |
|
Input Voltage |
24 VAC (18-36) or PoE |
|
Power Consumption |
DW/CW Models <0.48 A maximum,
0.90 A maximum with heaters
DN/CH Models <0.50 A maximum,
0.90 A maximum with heaters |
|
Alarm Input |
10 VDC maximum, 5 mA maximum |
|
Alarm Output |
0-15 VDC maximum, 75 mA maximum |
|
Service Connector |
Internal to housing 3-connector, 2.5 mm connector providing NTSC/PAL video outputs |
|
Pan/Tilt Adjustment |
Manual Pan 360° Tilt 80° (20° to 100° range) Rotation 360° |
|
Cable Entry |
1: 0.75-inch (1.91 cm) NPT threaded opening on side; 2: 0.75-inch (1.91 cm) openings on cover |
|
Compression |
MPEG-4, MJPEG in Web viewing mode |
|
Video Streams |
3, simultaneous |
|
Video Resolutions PAL |
4CIF : 704 x 576 |
|
2CIF : 704 x 288 |
|
CIF : 352 x 288 |
|
QCIF : 176 x 144 |
|
Bit Rate |
Configurable 20 kbps; 2 Mbps per stream, implements EnduraView |
|
Web User Interface |
Pelco Device Utility interface for viewing HTTP, requires Java Runtime Environment (JRE â„¢ ) |
|
Video Access |
from Web Browser Camera live view for up to 10 video sources |
|
Users |
10 simultaneous users, unlimited number of users using multicast |
|
Minimum Web Browser Requirements |
IPC (Pentium ® 4 microprocessor, 1.6 GHz) with Windows ® 98/2000/XP (or higher) or Mac ® OS X 10.3.9 (or higher) RAM 512 MB |
|
Ethernet Card |
100 Megabits |
|
Web Browser |
Microsoft Internet Explorer 5.5 (or higher) or FireFox 1.5 (or higher), Screen Resolution 1024 x 768 pixels or higher, 16 - or 32-bit pixel color resolution |
|
Firmware Upgrade |
Pelco Device Utility or Endura Application |
|
Supported Protocols |
TCP/IP, UDP/IP (Unicast, multicast IGMP), UPnP, DNS, DHCP, RTP, NTP |
|
Software Included |
Pelco Device Utility software identifies the IP address, checks the status of the device, and updates firmware |
|
System Integration |
Available at www. pelco.com/ipcam |
|
Environment |
Low temperature, indoor/outdoor
Operating Temperature -50° to 122°F (-46° to 50°C); de-ices to 25°F (-4°C)
Thermostat Operation Heater is thermostatically controlled to activate <41°F (<5°C) |
|
Certification |
• CE, Class A • UL Listed • UL Listed to Canadian safety standards • FCC, Class A • Meets NEMA Type 4x and IP66 standards |
seo
